当前位置 当前位置:首页 > PRODUCT  > Titanium plate
Titanium plate
Titanium plate
  • Titanium plate
  • Titanium plate

Titanium plate

简介
Pickling: immerse the workpiece in an aqueous solution such as sulfuric acid to remove oxide and other films on the metal sur
在线留言
详情内容
content details

There are two Executive Standards for titanium plate, GB / t3621-2007 and GB / t13810-2007, and ASTM b265, ASTM F136, ASTM F67 and ams4928.


Brand


American brand: GR1, Gr2, GR3, GR5, GR7, Gr12


Russian tag No.: bt1-00, bt1-0, fbt1-2, etc


Domestic brands: TA0, TA2, TA3, TA5, TA6, TA7, ta9, TA10, TB2, Tc1, TC2, TC3, TC4


I. referenced standards


1: GB 228 metal tensile test method


2: GB / T 3620.1 grades and chemical composition of titanium and titanium alloys


3: GB / t3620.2 chemical composition and allowable deviation of titanium and titanium alloy processed products


4: GB 4698 sponge titanium, titanium and ferroalloys -- Methods for chemical analysis


Titanium plate specification


Brand: TA1, TA2, TA3, TC4, GR1, Gr2, GR5


Standards: GB / T 3621-2007, GB / T 13810-2007, ASTM b265, ASTM F136, ASTM F67,


Dimensions: t 0.5-5.0mm x W1000mm x l 2000-3500mm t 6.0 - 30mm x w1000-2500mm x l 3000-6000mm T 30 - 80mm x W1000mm x l 2000mm


Uses: metallurgy, electronics, medical treatment, chemical industry, petroleum, medicine, aerospace, etc.


Hot working status (R)


Cold working status (y)


Annealing state (m)


Titanium plate manufacturing process


Hot forging is a forging process carried out above the recrystallization temperature of metal.


Hot rolling is a rolling process carried out at a temperature higher than the recrystallization temperature.


The cold rolling process in which the plastic deformation temperature is lower than the recovery temperature.


Annealing: a metal heat treatment process in which metal is slowly heated to a certain temperature, maintained for a sufficient time, and then cooled at an appropriate speed (usually slow cooling, sometimes controlled cooling).


Pickling: immerse the workpiece in an aqueous solution such as sulfuric acid to remove oxide and other films on the metal surface. It is the pretreatment or intermediate treatment of electroplating, enamel, rolling and other processes.


Characteristics of titanium plate


1. Titanium seed plate is an oxide film on the surface, which is equivalent to a good durable and wear-resistant hair separation agent. The use of titanium seed plate saves the separation agent, makes the electrode plate peel easily, and eliminates the pretreatment process of seed plate. Titanium seed plate is half lighter than copper seed plate.


2. The service life of titanium seed plate is more than 3 times that of copper seed plate, which can reach 10 to 20 years according to operating conditions


3. Electrolytic copper prepared from titanium seed plate has dense crystal structure, flat and smooth surface and excellent quality.


4. Since the titanium seed plate does not need to be coated with separation agent, the pollution of copper electrolyte can be avoided.


5. Improve the production capacity and reduce the production cost of electrolytic copper, so as to have better economic benefits.


在线留言

LEAVE A MESSAGE

客户服务热线

15529217021冯经理
18291423438李经理

在线客服